Roborock Qrevo Edge 3 Pro Review: Tailor-Made For Large Spaces (And Messes)

We may receive a commission on purchases made from links.

Whatever your feelings about the impending robot revolution, few can deny how far robotic vacuum cleaners have come. The Qrevo Edge 3 Pro, the latest robot vacuum from Roborock's Qrevo Edge series, was unveiled at IFA 2026 and is a prime example of recent advancements in robot cleaner technology.

Touting 36,000 Pa of suction power, an upgraded AdaptiLift Chassis 3.0 that allows the device to cross thresholds of up to 3.46 inches, and a slim design capable of sneaking below furniture as low as 3.13 inches, this is a far cry from the bulky robot vacuums that had early adopters pulling their hair out with each tumble down the stairs and scuffed piece of furniture. However, as is often the case, advanced tech does not come cheap. With a $1,499 price tag (although it's listed at $1,199.99 on Amazon and Roborock's website for a limited time), I was very interested to find out if some of the device's more tech-forward features (such as advanced obstacle avoidance and intelligent stain detection) were really worth the price.

The Qrevo Edge 3 Pro is being marketed to appeal to those looking for something more powerful than a simple back-and-forth robot vac, such as those with large homes, complex floor plans, and feisty cats who guard their favorite furry spot on the carpet from robotic interlopers. But are its features and cleaning capabilities enough to make this product worth buying? Roborock supplied me with a free review unit in exchange for this unbiased review, and I was excited to find out.

I tested the Roborock Qrevo Edge 3 Pro robot vacuum and mop for five days in a two-level home with laminate wood flooring, tile, carpet, and area rugs. The home also has a cat, which allowed me to test its performance on litter messes and pet hair. For the first round of tests, the robot and its dock were set up on the ground floor, which features mostly laminate flooring with a couple of large area rugs. Both vacuuming and mopping were tested here. For the second test, the entire setup was moved upstairs for another round of sweeping, this time on medium-pile carpet and tiled bathroom flooring.

There were a few features I couldn't test. For example, Roborock recommends only adding their floor cleaning solution to the dispenser in the dock before mopping. However, this cleaning solution is sold separately and was not included with our review unit. I still used the wet mopping functionality, but without adding any cleaning solution to the water.

Additionally, I couldn't fully test the Qrevo Edge 3 Pro's AdaptiLift Chassis 3.0, because there are no major ledges or thresholds between rooms in my home. However, I did attempt to test this feature on a half-inch rug.

Setting up Roborock's Qrevo Edge 3 Pro was a breeze. It took only about five minutes as the app guided me through the process of setting up the docking station, installing the Roborock app on my smartphone, and connecting the Qrevo Edge 3 Pro to my Wi-Fi network and phone's Bluetooth. The software detected the robot right away, and once powered on, the robot quickly found its dock and nestled in.

The Qrevo Edge 3 Pro includes a short pamphlet that guides you through the initial setup and app installation process (along with standard safety and warranty information), and the rest of the documentation and operating instructions are found within the Roborock app. I did not find this to be a problem. The app is slick and user-friendly, and navigating through its features and settings was intuitive and straightforward.

After the initial setup, the next step was to let the Qrevo Edge 3 Pro create an initial map of the ground floor. I activated this in the app and watched the robot scoot around for a while as it mapped out the space. It was neat to see a visual representation of this in the app, which shows a bird's-eye view of what the robot's LiDAR navigation sees. The robot did a great job of separating the different rooms, especially considering my ground floor has a fairly open plan. After the map was created, I was able to adjust the zones and rename the rooms as necessary. You can then use these zones to create custom routines or tell the robot to clean specific areas.

After the setup and mapping were complete, it was time for cleaning. Roborock recommends allowing the Qrevo Edge 3 Pro to vacuum three times before running a mop cycle, so that's what I did. The ground floor of my home has a fairly simple layout: two large spaces and two smaller rooms with no varying levels or major thresholds. The robot performed admirably, tackling the living room first (which has only laminate flooring) before moving to the kitchen, office, and bathroom.

The robot showed no hesitation going under furniture, and even squeezed nimbly through the legs of a rocking chair with maybe an inch of clearance. It did gently nudge things here and there, but the flexible outer bumper has some give. It's also quite sensitive. As soon as it touches something, the bot looks for another way around. I was never once worried about it marring my furniture.

The Qrevo Edge 3 Pro handled the kitchen and living room like a champ, but the office was the true test. This is where I have area rugs, and it's where I (and the cat) spend the most time. It also has a higher density of furniture and other obstacles on the floor. It proved to be no problem, although the rugs and the complexity of the room definitely slowed the machine down a bit. It also got noticeably louder as soon as it transitioned from cleaning the laminate floor to vacuuming the area rugs, immediately ramping up its suction power.

My cat's litter station is in the office bathroom, and she usually scatters litter around and tracks it into the office, as well as leaves behind the hair she sheds. That means sweeping is a daily (sometimes twice daily) chore. Luckily, the Qrevo Edge 3 Pro had no trouble whatsoever sucking away the litter and cat hair from the short-pile area rugs. That alone makes this robotic helper an obvious time saver.

After two more vacuuming runs, I filled the docking station's water tank and instructed the Qrevo Edge 3 Pro to initiate a vacuum and mop cycle. This is easy to do from the app: you can select vacuum, mop, or vacuum and mop preset, or run any custom routines you create for specific rooms. I simply told it to do a full vacuum and mop cycle. The mop heads rest in the bottom of the docking station; when it's time to mop, the Qrevo Edge 3 Pro attaches them and rolls out.

I assumed it would complete another full vacuum cycle, then mop, but it actually alternated between the two as it cleaned. I was a little surprised to watch it mop the laminate floors in my office before visibly raising the damp mop heads and moving onto the area rugs for sweeping. Just as quickly, it would return to the laminate floor to resume mopping. I admit I didn't see any discernible pattern to the Qrevo Edge 3 Pro's cleaning, but it was effective, so I didn't worry about it.

Despite not using any cleaning solution for the mopping function, I was impressed to see the dirty water the Qrevo Edge 3 Pro had deposited in the second dock tank. I keep my floors pretty clean, but the robot did an impressive scrubbing job even when using only water. On the other hand, the microfiber mop brushes did seem to lose their moisture after a short while, and I imagine it would take several runs for the Qrevo Edge 3 Pro to fully mop your floors. Another thing to note is that the dock uses warm air to dry the mop heads after use, which I found both convenient and hygienic.

For the final test, I moved the Qrevo Edge 3 Pro upstairs, where I have a half-inch, medium-pile carpet and a large, thick area rug. The area rug is heavier than the rugs in my office and sits on top of the carpet, so I was curious to see how the robot would handle it. I especially wanted to see if its wheels would get caught on the edges of the area rug. These edges don't always lie perfectly flat (especially when there is weight on the rug). After turning the robot back on, I initiated another mapping cycle for the second floor. It completed this quickly and then began vacuuming.

Again, it had no trouble. Despite the thicker carpeting, the Qrevo Edge 3 Pro easily crawled onto the thick rug without any snags (the AdaptiLift Chassis did seem to help here). I also spent more time exploring the various cleaning options in the app, particularly the "deep cleaning" function for the medium-pile carpet, which ramped up the vacuum's power. Performance was equally admirable upstairs as it was downstairs. The Qrevo Edge 3 Pro made short work of its cleaning cycle and transitioned seamlessly between the carpet in the bedroom and the tile floor of the bathroom.

Onboard LiDAR navigation is nothing new with these robot vacuums, but it's arguably the most advanced part of the machine and a potential sticking point. I was pleased to find that Roborock's Qrevo Edge 3 Pro performed well when it came to mapping and navigation, albeit with some quirks. The robot can create and save multiple maps (as demonstrated in the final upstairs test), so you can move it to another floor or location in your home, and it will remember how to clean it. It has no problem going under tight furniture, nimbly swerving around table legs, or sidling up tight against the wall for edge-cleaning.

It's also pretty good, although not perfect, at avoiding obstacles. Some minor nudges and bumps are to be expected, and the Qrevo Edge 3 Pro certainly had some while cleaning. However, it got noticeably better at avoiding things on subsequent runs, so it does seem to learn as it goes. Living obstacles (namely, me and my cat) were also not a problem. It came humming into the kitchen twice while I was in there; once when I was at the sink doing dishes, and a second time when I was cooking on the stove. In both instances, it came within an inch of my foot, noticed I was there, and moved around without bumping into me.

You can activate the "pet detection" feature in the app during setup or toggle it on and off in the menu. This raises the sensitivity of the robot's obstacle avoidance algorithm. Since I have a cat, I turned it on during setup and didn't turn it off, so I can't say how it behaves, or if the robot would have had more collisions, had I turned this off. The Qrevo Edge 3 Pro does have one blind spot: small objects on the ground. Due to its top-mounted LiDAR and front sensor layout, the robot has trouble detecting low-lying objects on the floor (think things like small cat toys, ant baits, etc.) and seems to knock them around while cleaning.

Throughout my testing, I found a lot to like about the Qrevo Edge 3 Pro. Setup is easy, the dock is sturdy and functional, and the app is user-friendly. The robot itself cleans both hard floors and carpet well. The battery life is great, too — a 35- to 40-minute run only brought the charge down to about 80%. It's also reasonably quiet. My cat hates my noisy vacuum cleaner, and even bolts out of the room if she sees me grab the dust-buster. The Qrevo Edge 3 Pro ran quietly enough to elicit nothing more than mild curiosity from the feline.

Another thing I appreciate about the Qrevo Edge 3 Pro is that its operation can be as simple or complicated as you make it. If all you want to do is tell it to vacuum the entire floor, mop, or both, it can do that. If you want to schedule it to clean at certain times, create "no-go zones," set room-specific routines, or run a deep-clean on a particularly dirty floor, the app lets you do that. For my purposes, I opted for a simpler operation, as I like "set it and forget it" solutions and prefer not to fuss with things too much. But the Roborock app gives you a lot of control over how you use the device.

Of course, I also discovered some things I didn't like about the Qrevo Edge 3 Pro, although they were all relatively minor. The only thing I'd consider an actual problem is its small object detection. Be sure to pick up any small, low-lying items on the floor that you don't want knocked around (or swept up). My only other quibbles are things you're likely to experience using any robot vacuum. First, although the Qrevo Edge 3 Pro is larger and more advanced than many other robots on the market, expect it to require multiple runs to fully clean your floors. This has less to do with battery life and more to do with the fact that its internal dustbin and water tank can only hold so much before it has to return to base.

Another cleaning bottleneck I noticed was during its mop cycle: the mop heads running dry rather quickly. Although the mopping functionality was impressive for giving the floors a quick clean-up (even without using any added cleaning solution), I wouldn't count on the Qrevo Edge 3 Pro to replace a proper household mop if your floors are really dirty. Again, these are minor complaints, and ones you can expect to deal with on any robot vacuum and mop due to the compact design of these machines.

The Roborock Qrevo Edge 3 Pro is a powerful, feature-rich, and expensive robot vacuum. I was very impressed with its performance and ease of use, and greatly enjoyed testing it. It's a solid choice for anyone looking for a flagship 2-in-1 robotic cleaner that can handle a larger home, particularly one with tricky areas (such as raised thresholds) that might trip up other units.

On the other hand, many people will likely find the Qrevo Edge 3 Pro to be overkill. It's a large and capable robot vacuum and mop, but smaller homes, apartments, and condos probably don't require something of this caliber. A less advanced, budget-friendly robot vacuum would likely be more cost-effective in such cases. But if you are in the market for a robot vac and mop combo that can tackle a larger space, the Roborock Qrevo Edge 3 Pro is definitely worth a look.