No One Will Guess That Your New Modern Lampshade Was Made From Clothespins
We may receive a commission on purchases made from links.
Finding the right lighting solutions for your space can be tricky. Are you looking for a lot of overhead light or would you like to emphasize accent lighting? Do you love an antique or traditional aesthetic, or are you after a modern solution? No matter what you prefer, there's no denying the number of creative indoor lighting ideas for your home, especially if you're eager to get good lighting in every room. This easy DIY is a perfect way to narrow down your options. By gluing clothespins into hexagons and stacking them, you can create a beautiful, modern lampshade.
The most important item for this project is clothespins. You can pick them up from your local craft store, or these large Wooden Clothespins from Mr. Pen are a good option. The amount of clothespins you need will depend on how tall you want your lamp to be. You'll also need some hot glue and a hot glue gun. If you want a stronger glue, consider this Wood Glue from Titebond. Beyond those two essential items, you will also need a light source. You could use these LED Tea Lights from KOABY, or you could use something like this Lamp Base from Tuanse. If you use the lamp base, you will also need to buy a bulb since this base doesn't come with one. One thing to note: because this project uses wooden clothespins, do not use candles or any lighting solution with an open flame.
How to use clothespins to make a modern lampshade
Start off this DIY project by taking apart your clothespins. Twist the wood pieces until the metal wiring comes apart and you are left with two pins. After that, it's time to assemble! Glue the head of one clothespin to the tail end of another, and make sure the flat sides face the center. Once you have a hexagon shape with the six pieces of clothespins, add a little extra glue at all the connections. Repeat this process a dozen or so times. These hexagons will be stacked on top of each other, so you can determine how many layers you need based on your desired height.
After your hexagons have dried (around 30 seconds to one minute for hot glue, 30 minutes to one hour for wood glue to be dry to the touch), you'll start stacking. Make sure you stagger the layers so the hexagons don't all line up perfectly (or if you'd rather that shape, go for it). Apply glue as you go, adding it to the meeting points where the hexagons touch. After that's glued and set, you can add your light to the center.
Rather than leave the clothespins their natural wood color, you could always paint the lamp instead. Try something like this Acrylic Paint Set from Caliart, or these Acrylic Paint Markers from Betem. Spray painting your lamp is another option (and it may be easier to cover than using a paint brush or marker). This Spray Paint from Rust-Oleum is a great option and comes in a variety of colors. If you'd rather add this project to your collection of planters made from common household items, put a plant in it instead of a light. Then, get ready to show off your new DIY project.