Woman Uses An Old Picket Fence To Make An Impressive Wood Cutting Board
We may receive a commission on purchases made from links.
When it comes to kitchen tools, cutting boards count among the most versatile for both the home gourmand and the home decorator. For the former, they prevent the chef's creative knife skills from marring the countertops when it's time to slice a bread loaf. For the latter, cutting boards can be turned into decor befitting the most stylish kitchens. Typically, the more distinctive the cutting boards on display are, the more attractive they are. And while the market is filled with plenty of designer boards, one YouTuber, Mary from White Cottage Company, didn't leave her display up to the whims of what's available at big box stores. Instead, she made an impressive cutting board from the leftover slats of a wood picket fence.
The pieces of wood that went into her DIY had a distinctive point on top. If you're making your own version of this cutting board, look for boards that have a similar silhouette. You only need three pickets for this DIY, plus two smaller pieces of scrap wood. Since only one portion of the cutting board features the point, you can use a single board that you cut into smaller pieces for this. Be sure to grab some wood glue and some boiled linseed oil, too. In the latter case, Furniture Clinic Boiled Linseed Oil is an example of what you're looking for.
A pencil, a tape measure, wood glue, and nails are among the first tools you'll need to complete this DIY. The White Cottage Company crafter also used a sander. Finally, a nail gun and a drill helped her put the final project together.
Constructing the cutting board out of a picket fence board
To start the construction of her cute kitchen decor piece, Mary cut three pieces of wood. Two were the same length. The third, the portion with the pointed end, was longer. She then placed the two shorter boards on each side of the pointed one to confirm that the ends were even: The two plain boards lined up with the "shoulder" that sits just below the point on the pointed picket. She then sanded the boards. After that, she cut two smaller pieces to fit across the backs of the three larger ones when they were placed side by side. The two smaller pieces of wood were glued across the back of the three boards, with one piece at the top and one at the bottom, then nailed into place for extra support. Mary also drilled a hole at the top of the pointed picket post, then sealed the boards with boiled linseed oil.
It's important to note that boiled linseed oil is not food safe — this YouTuber's cutting board was for decorative purposes only, but if you want yours to be usable, try a combo of food-grade mineral oil and beeswax instead to give it a water-resistant finish. If you're planning to use the board solely as a decor item, you may want to add some embellishments to ensure that the board elevates the look of your countertop. For example, it's common to see cutting boards with a favorite recipe painted on or burned into the wood. Stencils, like FINGERINSPIRE Bread Stencils, would also be an option. The images of bread and good cheer would feel right at home with the rest of any cozy kitchen.