No More Sloppy Gravel Driveways: The Lowe's Find That Reduces Mess And Saves Time
Gravel creeping across your lawn. Bare patches where the stones used to be. That familiar scraping sound as you drag everything back with a rake, again! If you have a gravel driveway, chances are, you have faced these problems before and are looking for a way to reduce the mess. Sure, you could keep raking every now and then, but that takes a lot of time. So, if you would rather spend that time on something else, Lowe's has a find that is definitely worth a look: The DOMINATOR Mulch Anchor. It is a clear adhesive glue that can be used to bind mulch and gravel in place.
The adhesive sprays on as a liquid and binds the small stones together, keeping them from slipping, which reduces the mess. As for application, 1 gallon of this glue covers up to 150 square feet per spray application, and the manufacturer says that the glue dries completely clear in six to 24 hours, depending on weather. Furthermore, the glue can last up to 24 months before reapplication is needed, and its formula is also non-toxic and pet-friendly.
Customers seem to have positive experiences with DOMINATOR Mulch Anchor. At the time of writing, product reviews consistently mention that the adhesive is easy to apply and has strong holding power. Besides that, some buyers also appreciated how quickly it dries. However, not all reviews are positive. Quite a few customers have given the adhesive low ratings, too, and the most common complaint seems to be that one coat of this adhesive is ineffective. This is something you should keep in mind, and remember that there are other factors, like gravel depth, that apply to keeping your gravel driveway fixed in place.
How to use the DOMINATOR Mulch Anchor correctly
Start by identifying your actual problem areas rather than treating the whole driveway. The DOMINATOR Mulch Anchor works best in places with light traffic, such as decorative driveway borders, pea gravel beds alongside the driveway, and path edges. Don't use it in areas that come in contact with car tires regularly. Leave them loose and rake and replenish as needed. Even if you use the adhesive, it alone will not hold under the repeated tire pressure, and you will need to combine it with other ways to keep your gravel driveway secure and locked in place in areas of your driveway that come in contact with tires.
For instance, you can use gravel stabilization grids. These are often honeycomb-like cells/panels that help contain loose gravel and reduce migration and rutting while supporting vehicle traffic. Similarly, you can also build a driveway edge. This will create a physical border that helps stop gravel from spreading into neighboring lawns or planting beds. Just make sure that you remember the 3-inch edging rule for gravel driveways, and that the gravel is completely dry when you spray the DOMINATOR Mulch Anchor. Plus, apply multiple coats.
Many buyers noted that a single coat is not enough to hold gravel in place, and the manufacturer suggests applying multiple coats too. Just make sure that you wait about an hour between coats and let the finished area cure for around 24 hours before use. Also, make sure you order enough adhesive to fulfill your requirements. At 150 square feet per gallon, even a modest border can use up product faster than expected.