Use Skewers To Transform A Wooden Hoop Into A Boho Pendant Light With A DIY
We may receive a commission on purchases made from links.
You've started decorating your home bohemian-style. Your space is full of color and texture, offering a natural, organic vibe. Plants fill your living space, earth tones are everywhere, and vintage furniture completes the look. If you're ready to turn your attention to lighting, you may have already tried a boho-inspired DIY light fixture using a wire fruit basket. Now, here's another DIY lighting project to consider. By using wooden hoops and covering them with skewers, you'll build a beautiful, boho pendant light that will fit right in with your space.
Not only is this a relatively easy DIY to accomplish, it's also affordable. You'll need a total of four embroidery hoops: two large ones and two small ones. You can find these at a local craft store, or you can buy a set online like these Embroidery Hoops from Phinus (you'd have to buy two sets in order to have the right amount for this DIY). You'll also need wooden skewers (such as these Bamboo Skewers from Judia YLL). Try to find skewers that aren't pointy at the ends so you don't have to trim them flat. Buy some raffia ribbon, like this Raffia Ribbon from Creatrill, to secure your skewers to the hoops. Finally, grab some hot glue and a hot glue gun, and a pendant light bulb. This Pendant Light Cord from DiCUNO is a good option.
How to make a boho pendant light with wooden hoops
Start by disassembling your embroidery hoops and removing the outer rings so you have four wooden hoops. Then, you'll begin attaching the wooden skewers to the hoops. Use your hot glue to stick the end of a skewer to the outside of a large hoop, and repeat the process of attaching the skewers until you've gone around the whole hoop. Allow the hot glue to dry for a few minutes, and then use your raffia to cover any visible glue by wrapping and crisscrossing it over each skewer. Next, add more skewers to fill in the gaps. Use your hot glue gun to attach the other end of the skewers to the other large hoop and wrap them with raffia to cover the glue. Repeat this whole process with the smaller hoops to create two separate shades. Finally, glue one skewer across the diameter of each hoop so that the smaller shade can rest on top of the large one. Glue the two shades together, and you've created a boho pendant light shade that'll make heads turn.
Here's the catch: your boho shade may look beautiful, but you still need to attach the pendant cord to make it functional. To do this, create a hashtag-shaped support on top of your shade using four skewers. The hole in the middle should be large enough for the cord to pass through but small enough that the light socket won't slip through. Glue these skewers to the hoop to make sure it's secure, and you're all set.
Make your boho pendant light your own
You can also adjust the coverage and brightness of your light fixture. Keep your fixture more open and bare by spacing out the skewers. This will make the bulb more visible while allowing more light to shine through. Or, if you want more coverage, you could weave the raffia through the wood skewers. That offers a unique, organic feel to your shade.
You could also use this piece as a lamp instead of a pendant light. Simply get a base like this Lamp Base from Tuanse and then set your shade on top. It may be easier to set your fixture on a table or shelf instead of hanging it from your ceiling. Whether you're looking to design a boho living room to embrace the hippie-chick spirit, or ways to style the perfect boho entryway, this DIY pendant light just found its new home.