She Makes Stylish Faux Leather Deck Chairs On A Budget
If your dream chairs are out of your budget, sometimes the solution is to make them yourself! That's exactly what @Chez Moi – Amanda on YouTube chose to do, and the results are incredible. She built a set of woven faux leather chairs with almost no woodworking experience. Although the DIY might seem intimidating at first, a beginner can definitely complete the task with the right materials. The mid-century-inspired design features a simple wooden frame with a woven leather seat and back. Wood furniture is a trend that's making a big comeback, which means this chair is the perfect project for a current interior. You'll need five 2-foot-by-2-foot boards, 3 yards of leather or faux leather, 2-inch screws, a stain like Minwax Early American wood stain, a miter saw, and a drill.
Start by cutting the wood into the following lengths: 16-inch front legs, 14-inch back legs, 20- and 22-inch seat pieces, 19- and 22-inch back pieces, and 22-inch side supports. Cut the frame corners at 45 degrees, and cut the legs at 20 degrees so they angle outward. Assemble the upper and lower rectangular frames, attach the legs with screws, and add horizontal support bars in between. Fill any gaps with wood filler, sand the entire frame, and apply the stain of your choice. Then the frame is totally done!
How to complete your chic leather chairs
Once your frame is ready, it's time to start working on the leather seat and back. First, cut the leather into strips approximately two inches wide. Fold each strip over the wooden frame and glue it underneath. Weave the strips across the seat and back in an over-under pattern, pulling them tightly as you go. Then, glue the ends underneath the frame. For additional support, attach canvas fabric beneath the woven seat before wrapping the remaining leather strips. Pull it tight, fold the edges underneath, and secure them with adhesive, screws, and nails for extra support. Trim away any excess material, and you're done!
Accent chairs can add a focal point to your living room, and these are no exception. It's all about making them suit your unique space. For a more traditional furniture look, hammer decorative upholstery nails around the seat, spacing them approximately 1½ inches apart. You can also experiment with different faux leather shades. Dark brown gives the chairs a more classic vintage appearance, while lighter tan or caramel tones create a more down-to-earth look. The same goes for the wood stain, which can be adjusted to complement your upholstery. You can even adapt Amanda's measurements to build taller versions for use as dining chairs. If you've been searching for ways to achieve the organic modern aesthetic in your home, these chairs are a fitting addition.