Mistakes Everyone Makes When Getting A New Roof

Replacing your roof is an essential part of being a homeowner. According to Bob Vila, the signs of needing a new roof are pretty obvious, even to those who don't have much experience in construction. When it's time, you'll notice that the shingles on your roof are starting to look a little bit worse for the wear. They will be faded, torn, or even cracked in some places. In addition, your roof might start to look like it's sagging, which is a telltale sign of roof rot. You might have moss or other plant life growing on your roof. If your roof is already at this point, it's time to call up a contractor or make plans to replace it yourself.

However, a great way to keep your home healthy and rescue your roof before it gets to an unattractive stage is to keep track of the replacement date. From there, you can set up a replacement schedule. You should get a new roof every 25-30 years, barring damage like a big storm (via Bill Ragan Roofing). When you purchased your home, your home inspector should have given this information to you. However, there are some things you should keep in mind once you know it's time to get a new roof. Whether you're buying a slate or metal roof, there are plenty of tips to keep in mind. As long as you avoid these common mistakes, you and your new roof should be in tip-top shape.

If you don't plan when it's time to get a new roof, you may have a patchy and mismatched result. According to DryHome, roof shingles can, unfortunately, change appearance over time. The constant sunlight, rain, hail, and wind can cause individual shingles and large groups to fade and warp over the years.

In addition to environmental damage, there is another problem. When shopping for shingles, you'll find that different suppliers carry different brands. If you run out of shingles halfway through the re-roofing process or need to replace a few spots on your roof, you will have to find new ones that might not match perfectly. To ensure a consistent result, buy your shingles from one source. It is always better to have a few too many shingles left over to use for patch jobs than it is to run out halfway through the process and scramble to find what you need to finish the project.

When sealing up your new roof, it's normal to want to make things as watertight as possible. However, making your attic too stuffy can lead to problems in your home. You want to ventilate the space properly when getting a new roof. According to Bob Vila, doing things this way might sound counterintuitive. After all, won't you be paying a higher energy bill each month with all that air leaking out of your attic? However, that's not the case. A well-ventilated attic saves you money in the long run.

Attics sealed off from the outside trap heat and moisture hostage in warm climates, which leads to shingles warping and cracking (via Roofing Contractor). During the winter, this trapped moisture can also freeze and ruin shingles. To avoid this, you'll need to work with your contractor (or yourself) to ensure that your attic has a great system of intake and exhaust vents and, in some cases, fans to keep things aerated. You'll also want to check out how much it costs to insulate an attic.

Experts in the roofing industry want to share a little secret: the slope of your roof has a significant impact on cost. According to Erie Home, the number one reason higher pitches cost more than their lower counterparts is height. When you add a steep slope, roofers automatically have to compensate with increased safety precautions. This step raises the overall bill of the project.

When selecting a roofer, choose a team with an extensive portfolio of steeply-pitched roofs under their belt (via Werner Roofing). Since this type of roofing is highly specialized, you want to make sure you get someone with the right experience so that things go according to plan. The contractor you choose will also need to be insured and hold relevant safety certificates required in your area. This way, you can ensure that you get a beautiful new roof and will avoid any potential on-site accidents along the way.

You should install your roofing in a particular order to maintain safety. According to Sheegog Contracting, there are three roof layers to replace when updating things. The first is the roof deck. This area is the layer of plywood underneath your roof's shingles. Typically, this deck doesn't need replacing each time you change the shingles. However, it's essential to check for rotting, warping, and other potential damage while it's bare. If all is okay, you can proceed to the next step.

The area between the roof deck and the shingles is a layer that often goes overlooked. It's the metal flashing. This area is the part of your roof that protects everything from moisture damage. When replacing your shingles, it's a good idea to go ahead and replace these too. If they fail, you are in for some expensive roof repairs and the inside of your home as well. However, it's important to remember that the metal flashing goes underneath the shingles ... in some shoddy situations, contractors might try to add protection after shingle installation. In this case, it's unlikely to work at all.

You can save yourself a lot of time by using starter strips of shingles on your new roof. According to Digital Roofing Company, it doesn't matter what color your starter strip is. The strip will end up underneath your actual shingles after installation is complete. They are typically made of fiberglass and come in a rectangular shape. Since starter shingle strips effectively seal things off, they add extra protection to your roof against moisture, wind, water leaks, and other elements.

In addition to protection, these starter strips also offer homeowners a sleek and chic look for their roof once construction is over (via GAF). They tend to lie flatter than hand-cut shingles put together in a makeshift strip. They also benefit you during the job because they generate less waste than traditional shingles. There won't be too much waste in your yard during the roof replacement project.

When it comes time to replace your roof, don't leave yourself vulnerable to fraud and shoddy work by choosing an unlicensed contractor. According to Schorr Law, there are three main reasons to hire a licensed team. You can guarantee that they have the work ethic and the base skill level necessary for a legal permit. You can also be sure that the contractor is at least aware of local construction laws and building codes, so it's more likely that they will follow them. Finally, they are more likely to be a trustworthy partner in redoing your roof because they operate a legal business.

You might think it's easier and cheaper to have your cousin or a friend of a friend do the work for you, but if you want professional, on-time results, then it's best to go with an actual professional (via Ultimate Construction).

The weather has a significant impact on your roof's health. A major storm can cause you to replace a 30-year-old roof in half the time due to the wear and tear on the shingles. This fact applies if you live in an area with heavy snowfalls. According to Golden Group Roofing, snow and ice can put excess weight on your roof and add moisture under your shingles. During the summertime, sunlight baking your roof every day can cause shingle discoloration. Plus, UV rays can cause them to expand and shrink.

While the weather impacts the longevity and looks of your home's roof, you also need to pay special attention to the weather forecast when you plan your roof replacement. When you pull off the shingles, your roof's delicate underbelly becomes exposed to the elements. To avoid damage to the structure, you'll want to get the new shingles onto your home as quickly as possible.