The Simple Solution To Get Rid Of That Unsightly Attic Door String
We may receive a commission on purchases made from links.
Is the unsightly appearance of your attic door string bothering you? Many homeowners hate that it's unattractive and always getting tangled. Fear not! There's an easy way to get rid of this eyesore. Fortunately, it's a simple fix that doesn't require extensive renovations or a hefty budget: replace the string with a pull-down system. This may be the perfect addition to your home's to-do list, especially as a finishing touch to an attic renovation.
Even homeowners with little or no DIY skills can comfortably take on this home improvement venture. You could either purchase a system, such as the one offered by Attic Ease for $27.65 at Walmart, or easily DIY your own. It is simply a matter of replacing the outdated string with an eye bolt and using a hooked pole to pull down the door. Forget about the traditional attic door string and embrace an upgrade that makes your home more beautiful and adds modernity and functionality to your living space. We'll show you how.
How to use a pull-down system
Fitting a pull-down system from Attic Ease is a simple task that requires only a few tools. First, lower the attic door for easy access and cut off the old cord. In case there was no previous mounting point, use a power drill with a ¼-inch drill bit to make a hole where the string was attached. Thread the pull-ring through the hole from outside of the attic door, hand tightening the fastener and washer assembly. To stabilize it better, you could tighten the screw using pliers. Once you have adjusted the ring into the right position, just push the attic door back in place by using the provided reach hook. Finally, find an appropriate place to store the hook for easy access, such as a well-organized hallway closet.
If you're feeling particularly inspired, you can craft your own version of this system. All you need is an eye bolt with a nut, a screw hook, and a dowel rod, all of which can easily be purchased from Home Depot for about $8 total. Remove the string and fit the eye bolt in its place, securing it with the nut. Then, drill a hole to screw the hook into the end of your preferred length of dowel, and voila! Your own pull-down system is ready to use. If you don't want to craft a hooked pole, just repurpose a draw rod for window shades, like this one for $15.90 on Amazon, or this closet hook pole for $14 on Amazon
Maintaining your pull-down system
When you have successfully installed the pull-down system, it becomes necessary to concentrate on maintaining it to ensure the best performance. It is essential to plan periodic inspections so that you can be sure that all parts are in good working order, and repair any signs of damage promptly to keep the system running smoothly. Another aspect of maintenance is lubrication. Employing a silicone-based lubricant on the door hinges and springs of the attic ladder prevents friction and ensures effortless operation. If not maintained, you might find yourself shopping for a new attic ladder.
Furthermore, members of the household should be reminded about safety measures. They should be aware of the correct use of the pull-down system, avoiding exerting too much force while also always making sure that the attic door is fully closed after use. By using these practices in your home routine, you not only increase your system's lifespan but also enhance its overall efficiency, thus giving you a trouble-free and improved experience.