The Cleaning Ingredient You Can Use To Remove A Stripped Screw

Using tools at an odd angle, installing a screw too tight, and using the wrong size screwdriver are examples of poor tool handling that can strip a screw. Unfortunately, it isn't always easy to avoid these errors when working on a project, so you will likely have to deal with a stripped screw at one point or another. After a screw head becomes damaged in this way, it can become incredibly difficult to remove. Luckily, you can attempt to overcome this challenge by pouring a bit of abrasive cleaning powder, such as Bar Keepers Friend, inside of the screw head. This should provide your screwdriver with enough grip to be able to turn the screw and remove it.

Advertisement

This hack works thanks to the gritty texture of the cleaning ingredient. While a stripped screw would typically prevent a screwdriver from hooking into the head, the friction added by the powder should help the tools stay in place. When you carry this method out properly, you should not have to worry about your screwdriver slipping out of place or failing to turn the screw. If you have tried every hack to remove a stripped screw and have not had success, consider grabbing some Bar Keepers Friend and giving this a shot.

How to use Bar Keepers Friend to remove a stripped screw

To use Bar Keepers Friend or a similar powdered cleaning ingredient to remove a stripped screw, start out by pouring the powder into your screw head. Ensure that you do not accidentally pour an excessive amount as this could lead to too much product blocking your view. Next, grab your screwdriver and begin slowly turning it counter-clockwise. Take your time to ensure that the tool grips onto the powder without popping out, so you may want to avoid using any electric tools at high speeds. After turning the screwdriver, you will hopefully notice the screw begin to loosen and release.

Advertisement

Keep in mind that this hack may not work in all cases. If your screw head is severely damaged, for example, the powder still may not help your screwdriver lock into place. A screw extractor kit will aid those who need to remove a broken screw. There are a few different types of screw extractors, and they typically work by digging a hole into the head of the stripped screw with one end, and pulling it out with the other end. Search your favorite home improvement store to find the right screw extractor kit for your needs. The Home Depot sells quite a few options online, including a highly rated four-piece set for $23.

Tips for preventing a stripped screw

Although this is a pretty simple hack, you probably do not want to have to spend time removing damaged screws in the first place. If you have been wondering why you keep stripping screws, the following tips can answer your question. The first piece of advice might seem obvious, however, it is still often overlooked. You need to use the right screwdriver for the job. This means that you need to ensure the tool is not too large or small for your screws. Additionally, avoid using an electric screwdriver at a high speed with flimsy screws. You will also need to ensure that you use a flathead screwdriver with a flathead screw, and a Phillips screwdriver with a Phillips screw.

Advertisement

The second tip is to ensure you use your tool properly. Do not use too much force or pressure when using your screwdriver. Ensure your tool is properly lined up with the screw, too. The final precaution you should take is to install pilot holes when appropriate, rather than attempting to install screws right into surfaces with no preparation. You will need to make this hole with a drill bit that is a tad smaller than your screw. This will help prevent stripping because it frees you from having to apply too much pressure when installing your screw.

Recommended

Advertisement